TECHNICAL & COMPLIANCES

Tanks comprise of:

• Wall and floor sheets in Galvabond G2 Z275 to AS 1307, prefabricated panels.
• Our minimum thickness sheets are 2mm. Wall sheets 5mm and above are Hot Dip Galvanised.
• Steel framework angles (top, bottom and intermediate, where required) external ladders, internal ladders on tanks up to 6m tall, lockable ladder guards or rolled safety cages, platforms and handrails, roof access hatch, bottom panel access hatch, level indicators.
• All nuts and bolts are minimum M12 high tensile and mechanically galvanised.
• The roof is low pitched construction with C or Z purlings and brackets. Roofing materials are dual clad Zincalume sheets, fastened with “Tek” screws.

AWWA D103
AS4100
AS4600
AS1397
AS4680
AS3500.1
AS2419.1
AS2118
AS1657
AS1170
AS1170.1
AS1170.2
AS1170.4
AS4020
AS1111
AS1112

Global Design

Bolted Steel Storage Tanks

Steel Structures

Cold Formed Steel Structures

Steel Sheet Galvanising

Hot Dip Galvanised Coatings

Plumbing and Drainage Part 1: Water Services

Fire Hydrant Installations System Design (Tanks)

Fire Sprinkler Systems

Fixed Platforms, Walkways, Ladders and Stairways

Structural Design

Structural Design Action Part 1: Dead and Live Loads

Structural Design Action Part 2: Wind Loadings

Structural Design Action Part 4: Earthquakes

Potable Products – Drinking Water

Bolts

Nuts

Member of

ALS GROUP QLD

Units 3 & 4

32 Premier Circuit

WARANA, QLD, 4575

AUSTRALIA

Phone:

Fax:

+61 7 5413 4343

+61 7 5413 4333